Outdoor/Indoor/Personal ozone exposures of children in Nashville, Tennessee

An ozone (O3) exposure study was conducted in Nashville, TN, using passive O3 samplers to measure six weekly outdoor, indoor, and personal O3 exposure estimates for a group of 10- to 12-yr-old elementary school children. Thirty-six children from two Nashville area communities (Inglewood and Hendersonville) participated in the O3 sampling program, and 99 children provided additional time-activity information by telephone interview. By design, this study coincided with the 1994 Nashville/Middle Tennessee Ozone Study conducted by the Southern Oxidants Study, which provided enhanced continuous ambient O3 monitoring across the Nashville area. Passive sampling estimated weekly average outdoor O3 concentrations from 0.011 to 0.O30 ppm in the urban Inglewood community and from 0.015 to 0.042 ppm in suburban Hendersonville. The maximum 1- and 8-hr ambient concentrations encountered at the Hendersonville continuous monitor exceeded the levels of the 1- and 8-hr metrics for the O3 National Ambient Air Quality Standard. Weekly average personal O3 exposures ranged from 0.0013 to 0.0064 ppm (7-31% of outdoor levels). Personal O3 exposures reflected the proportional amount of time spent in indoor and outdoor environments. Air-conditioned homes displayed very low indoor O3 concentrations, and homes using open windows and fans for ventilation displayed much higher concentrations.     

Development of processes for environmental protection based on self-propagating reactions

The possibility of exploiting self-propagating reactions for environmental protection is discussed in this paper. In particular, results obtained at the laboratory scale and related to the fixation and consolidation of high level radioactive wastes, the recycling of silicon sludge and aluminum dross produced by semiconductor industries and aluminum foundries, the treating and recycling of a highly toxic solid waste from electrolytic zinc plants, and the degradation of chlorinated aromatics, are examined with particular emphasis on the latter case. Specifically, the self-propagating destruction of hexachlorobenzene and 2-(2-4-dichlorophenoxy)-propanoic acid with calcium hydride as reductive substrate is demonstrated. In fact, the heat liberated by the reactions involved is large enough to guarantee the self-sustaining character of the process within a wide range of reactants compositions. Moreover, no residual chlorinated organic compounds were found in the final solid product. Some reactor engineering aspects, as well as other significant future scientific and technological issues, are also addressed in view of large-scale applicability of processes based on self-propagating reactions. To date, the batch reactor technology seems to be more easily applicable, although the use of continuous reactors is not excluded in the next future.     

Effects of heavy metals and nitroaromatic compounds on horseradish glutathione S-transferase and peroxidase

Glutathione S-transferase (GST) and peroxidase (POX) activities have a direct relation to the effect of stress on plant metabolism. Changes in the activities of the enzymes were therefore studied. Horseradish hairy roots were treated by selected bivalent ions of heavy metals (HMs) and nitroaromatic compounds (NACs). We have shown differences in GST activity when assayed with substrates 1-chloro-2,4-dinitrobenzene (CDNB) and 1,2-dichloro-4-nitrobenzene (DCNB). The conjugation of DCNB catalysed by GST was inhibited in all roots treated with HMs as compared to non-treated roots, whereas NACs caused induction of the activity in dependence on the exposition time and concentration of compounds. The conjugation of CDNB by GST was not affected to the same extent. The increase of GST activity was determined in cultures treated by nickel (0.1 mM) and diaminonitrotoluenes (DANTs, 0.1 mM) for 6 h, whereas the roots treated by 2,4,6-trinitrotoluene (TNT), 4-amino-2,6-dinitrotoluene (ADNT) and dinitrotoluene (DNT, 1.0 mM) needed 27 h treatment to induce the activity. The POX activity of cultures treated by HMs was inhibited to 17-35% in comparison to non-treated cultures. The POX activity of roots treated by TNT (0.1 and 1.0 mM) for 6 and 27 h and by ADNT (0.1 and 1.0 mM) for 6 h was inhibited. A partial increase of POX activity was measured in roots treated by all NACs for 27 h. The content of oxidized glutathione (GSSG) and reduced glutathione (GSH) in the roots differed significantly. It was followed as a symptom of the stress reaction of the plant metabolism to the effect of NACs and HMs.     

Deposition and Storage of Spheroidal Carbonaceous Fly-Ash Particles in European Mountain Lake Sediments and Catchment Soils

Spheroidal carbonaceous particles(SCPs) are produced only from high temperaturecombustion of fossil-fuels. In mountain lakesystems, they provide an unambiguous indicator ofatmospheric deposition. In order to comparedepositional fluxes of SCPs between mountainareas experiencing various pollutant regimes,intensive bulk deposition sampling was undertakenat five sites across Europe. Catchment soil coresand lake sediment cores were also taken at eachsite to compare SCP storage over the post-industrial period. Atmospheric, sediment and soilSCP data showed similar patterns. Highestcontamination was found in Scotland, Slovakia andSpain with the Austrian site intermediate and themid-Norwegian site least contaminated. A highproportion of accumulated SCPs were found to bestored in catchment soils at each site.Therefore, a significant increase in soilerosion, possibly as a result of future climatechange, could lead to the input of largequantities of catchment stored SCPs and, byimplication, other atmospherically depositedcontaminants to the lake ecosystem.     

Effects of nanoparticles on Daphnia magna population dynamics

Spherical TiO₂ nanoparticles (npTiO₂) were prepared by controlled hydrolysis of tetraethoxy orthotitanate under a nitrogen atmosphere. ZnO nanoparticles (npZnO) were prepared using hydrothermal methods. The crystal structure, chemical, thermal and morphological properties of npZnO and npTiO₂ were characterised using Fourier Transform Infrared Spectrometer, enery-dispersive X-ray spectroscopy, X-ray diffraction, and scanning electron microscope techniques. The short- and long-term experiments were started with neonates taken from the same culture and laboratory condition. In the acute experiments, npTiO₂, npZnO, and cocktail concentrations were applied. 96h-LC₅₀ values were 1.8, 0.7, and 0.1?mg?L^?1, respectively (p?<?.05). For the chronic experiments, different npTiO₂ concentrations were performed. 21d-LC₅₀ value was 1.0?mgL^?1 (p?<?.05). Morphometry became progressively worse in concentrations of more than 1?mgL^?1 npTiO₂. Neonate and young individuals were more sensitive to death because of their low tolerance. This result was affected by population progeny and growth rates (p?<?.05). While control and 0.5?mgL^?1 npTiO₂ groups were determined as growing population, 1.5 and 2?mgL^?1 npTiO₂ groups had decreased population size as R₀ values. Consequently, the relationships between nanoparticle accumulation within Daphnia magna and its population structure and body morphometry for each concentration were important indicators. Its tolerance level to nanoparticles under laboratory conditions reflected its replacement and behaviour in the ecosystem.     

Hydrodynamics and contaminant transport on a degraded bed at a 90-degree channel confluence

Channel confluences at which two channels merge have an important effect on momentum exchange and contaminant diffusion in both natural rivers and artificial canals. In this study, a three-dimensional numerical model, which is based on the Reynolds Averaged Navier–Stokes equations and Reynolds Stress Turbulence model, is applied to simulate and compare flow patterns and contaminant transport processes for different bed morphologies. The results clearly show that the distribution of contaminant concentrations is mainly controlled by the shear layer and two counter-rotating helical cells, which in turn are affected by the discharge ratio and the bed morphology. As the discharge ratio increases, the shear flow moves to the outer bank and the counter-clockwise tributary helical cell caused by flow deflection is enlarged, leading the mixing happens near the outer bank and the mixing layer distorted. The bed morphology can induce shrinkage of the separation zone and increase of the clockwise main channel helical cell, which is initiated by the interaction between the tributary helical cell and the main channel flow and strengthened by the deep scour hole. The bed morphology can also affect the distortion direction of the mixing layer. Both a large discharge ratio and the bed morphology could lead to an increase in mixing intensity.     

Mercury in fish tissues in the area of Malachov Hg-ore deposit (Slovakia)

Environmental Geochemistry and Health - The abandoned Malachov deposit belongs among the most important historic Hg deposits in the world. The soil, groundwater, surface water, plants, and animals...     

The influence of air flow on maximum explosion characteristics of dust–air mixtures

A standard spherical apparatus for measuring explosion characteristics was modified to give increased and controlled turbulence within a dust–air mixture. This was intended to mimic the local effects which may occur during industrial dust explosions, particularly secondary ones which may develop in ducts or mine galleries where the initial explosion causes an increased air velocity and suspension of further quantities of dust.The results show that there may be a doubling of the maximum explosion pressure and of the rate of pressure rise during the explosion under more turbulent conditions. This is significant for modelling of dust explosions and suggests that explosion relief may be inadequate if this factor is not taken into consideration.The modified apparatus therefore gives a laboratory method for assessing the effect of turbulence in dust explosions.     

Simultaneous Removal of Cationic and Anionic Dyes from Binary Solutions Using Carboxymethyl Chitosan Based IPN Type Resin

Journal of Polymers and the Environment - In this study, a novel bead form IPN type resin comprising poly (2-Dimethylaminoethyl) methacrylate and carboxymethyl chitosan networks with a high dye...